Mechanical Seal Agitator Seal for Reaction Kettle

A mixer seal is a mechanical seal used specifically on Agitators / Mixers / Vessels.

There are top entry, bottom entry and side entry mechanical seals depending on where the agitator is located on the actual vessel.

You can use a mechanical seal in ~99% of agitator applications.

 Agitator  seals Features：

– Shaft sizes are larger for a mechanical seal agitator. There are no widely used standards for agitators / mixers.

– Mechanical seal for agitator can have a bearing.

– There is increased run out for mechanical seals used on an agitator compared to mechanical seals for pumps.

– There are generally wider ranges of pressure and temperature for a mechanical seal on an Agitator.

– Lower speed agitators than pumps.

– Top Entry Mechanical Seals used on Agitators are in the vapour space of the tank and cooling is different, a cooling flange is sometimes required.

– The piping plans for a Mechanical Seal for Agitators are limited to 53, 54 & 74 plans.

  Mechanical seal is a very important component. Our mechanical seals are self-produced by Saymeritall, allowing us to choose the most suitable mechanical seal structure and materials for different mixing conditions. As we understand the structure of agitators best, it ensures the best mechanical seal effect and the longest service life.